Re: gEDA-dev: Next gEDA release

[Peter Clifton <pcjc2-at-NOSPAMcam_dot_ac_dot_uk>]

On Tue, 2007-11-27 at 01:02 +0000, Peter Clifton wrote:
> On Mon, 2007-11-26 at 19:53 -0500, Ales Hvezda wrote:

> > However, while I'm here, I've been playing with gaf master and noticed
> > the following:
> > 
> > 1) run gschem
> > 2) place a component say 7400-1.sym
> > 3) Mirror the above component
> > 4) save the schematic and exit gschem
> > 5) launch gschem using the saved schematic and move or copy the component
> > 6) save the schematic and exit gschem
> > 
> > Look at the schematic and notice the coords on the component are 
> > incorrect.  I know this used to work.  :)
> 
> Gah, almost certainly my fault...
> 
> I see the symptom, and I know roughly where to start looking. I'll fix
> it unless anyone beats me to it.

I've found the fixes I think.. both for the mirroring bug (happens on
load of a mirrored component), and Peter B's crash cutting an attribute
(but not its parent object) into the paste-buffer. Both were my fault.

I've not committed these yet, but I'd appreciate someone taking a look,
and testing. They seem to fix the issues for me, and loading + saving a
schematic with mirrored components results in an identical file.

Please see the top 3 commits here:
http://repo.or.cz/w/geda-gaf/pcjc2.git

I've not pushed them yet, as I'm learning hasty pushing of fixes can ->
bad fixes.

Best wishes,

-- 
Peter Clifton

Electrical Engineering Division,
Engineering Department,
University of Cambridge,
9, JJ Thomson Avenue,
Cambridge
CB3 0FA

Tel: +44 (0)7729 980173 - (No signal in the lab!)



_______________________________________________
geda-dev mailing list
geda-dev@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-dev