Re: gEDA: generating a spice netlist

["Mike Jarabek" <mjarabek-at-NOSPAMistop_dot_com>]

Hi,

	Looks like your attributes have become un-attached.  Try the following:
	- Select the component.
	- Shift click on the attributes that should belong with that component
	- From the menu, select Attributes->Attach or hit `ta'.
	- Selecting the component should now highlight all the attributes that are
attached. Menu Edit->Edit... should call up a dialog box that has all of the
attached attributes for a selected component now.
	- Save your schematic.

Mike

Charlie <charles@demartigny.com> said:

> Charlie wrote:
> 
> > What modifications need to be made to this circuit.sch file in order 
> > to do a gnetlist -g spice... (it works with -g geda)
> > The circuit.net file it creates says No valid value attribute found 
> > for R and B
> >
> > v 20020209
> > C 57300 44800 1 90 0 battery-1.sym
> > {
> > T 56800 45100 5 10 1 0 90 0
> > uref=B1
> > net=-12v:1
> > net=+12v:2
> > label=12V Battery
> > value=12V
> > }
> > C 57800 45900 1 0 0 resistor-1.sym
> > {
> > T 58000 46200 5 10 1 0 0 0
> > uref=R1
> > label=C1
> > value=500
> > }
> > C 57300 43500 1 0 0 gnd-1.sym
> > N 57100 45500 57100 46000 4
> > N 57100 46000 57800 46000 4
> > N 58700 46000 59200 46000 4
> > N 59200 46000 59200 44300 4
> > N 59200 44300 57100 44300 4
> > N 57100 44300 57100 44800 4
> > N 57400 43800 57400 44300 4
> >
> >
> Wrong schematic! The one I had trouble with was this:
> 
> v 20020209
> T 74800 45500 8 10 1 0 90 0
> uref=C2
> T 70400 47800 8 10 1 0 0 0
> uref=C1
> T 70100 48100 8 14 1 0 0 0
> label=C1
> T 70000 48400 8 14 1 0 0 0
> value=1uF
> T 72000 45500 8 10 1 0 90 0
> uref=R1
> T 72400 45900 8 14 1 0 0 0
> label=R1
> T 72400 46200 8 14 1 0 0 0
> value=2K
> T 73000 47700 8 10 1 0 0 0
> uref=R2
> T 72500 48400 8 14 1 0 0 0
> value=500
> T 72600 48000 8 14 1 0 0 0
> label=R2
> T 68800 45600 8 10 1 0 90 0
> uref=V1
> T 67400 45900 8 14 1 0 0 0
> label=V1
> T 66900 46300 8 14 1 0 0 0
> value=1V 0Deg
> T 68600 43600 8 14 1 0 0 0
> label=GND
> C 75300 45300 1 90 0 capacitor-1.sym
> C 70200 47300 1 0 0 capacitor-1.sym
> C 72300 45300 1 90 0 resistor-1.sym
> C 72800 47400 1 0 0 resistor-1.sym
> C 69300 45300 1 90 0 voltage-1.sym
> C 69000 44100 1 0 0 gnd-1.sym
> N 69100 46200 69100 47500 4
> N 69100 47500 70200 47500 4
> N 71100 47500 72800 47500 4
> N 73700 47500 75100 47500 4
> N 75100 47500 75100 46200 4
> N 75100 45300 75100 44500 4
> N 75100 44500 69100 44500 4
> N 69100 44400 69100 45300 4
> N 72200 46200 72200 47500 4
> N 72200 45300 72200 44500 4
> T 75200 49400 9 14 1 0 0 0
> Band-Pass Filter
> 
> This gives me :
> 
> * Spice netlister for gnetlist
> * Spice backend written by Bas Gieltjes
> U? 0 2 ERROR_INVALID_PIN ERROR_INVALID_PIN ERROR_INVALID_PIN
ERROR_INVALID_PIN ERROR_INVALID_PIN 
> ERROR_INVALID_PIN ERROR_INVALID_PIN ERROR_INVALID_PIN <No valid value
attribute found>
> .END
> 
> 
> -- 
> L8er,
> Charles
> 
> http://www.demartigny.com (under construction, updated frequently)
> 
> 
> 
> 
> 
> 



-- 
--------------------------------------------------
                              Mike Jarabek
                                FPGA/ASIC Designer
   http://www.doncaster.on.ca/~mjarabek
--------------------------------------------------