[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: gEDA-user: I need to open and print a PCB created inExpressPCB:What are my options?
On Jan 29, 2007, at 8:00 PM, John Luciani wrote:
>> If I only need a few (3-6)
>> MOSFETS, short of calling and asking for sample parts, what can I do?
>
> If you have a school email address you can get free (or very low-
> cost) samples
> from almost any semiconductor manufacturer. For MOSFETs I would try
> On-Semi.
> On-Semi has an excellent website and it is very easy to get samples
> using the
> website. Their parts are low-cost if you can not get samples.
Also, unless you're using really weird MOSFETs, most common parts
can be had in small quantities either from Mouser/DigiKey/etc, or via
eBay (new of course...many people oh-so-wrongly assume "eBay" means
"used").
I use a lot of 2N7000, 2N7002, BSN20, and IRF520/IRF820/etc
MOSFETs in my designs and I've bought most of them in ~20 unit
quantities on eBay for a few dollars at most.
-Dave
--
Dave McGuire
Port Charlotte, FL
_______________________________________________
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user