gEDA-user: Re: gsch2pcb problem - latest CVS or latest Suse 10.1upgrade?

["KURT PETERS" <peterskurt-atMUNGEDmsn_dot_com>]

I followed the second option of doing a clean CVS download and install and 
all is right with the world again.  I might have just gotten a bad update... 
Unlucky I guess.
Kurt

Message: 4
Date: Fri, 09 Feb 2007 09:03:29 -0500
From: Dan McMahill <dan@mcmahill.net>
Subject: Re: gEDA-user: gsch2pcb problem - latest CVS or latest Suse
	10.1	upgrade?
To: gEDA user mailing list <geda-user@moria.seul.org>
Message-ID: <45CC7F31.3080801@mcmahill.net>
Content-Type: text/plain; charset=us-ascii; format=flowed

KURT PETERS wrote:
>I made some minor mods to a gschem file and ran gsch2pcb (I stupidly 
>installed the cvs version before doing this AND updated Suse 10.1), and got 
>the following:

-snip-
>stdin:2: /usr/bin/m4: Bad expression in eval: /2


grep footprint= mnaxbo2_{1,2,3,4,5}.sch | sort -u

to get a list of all the footprints.  My guess is that somewhere in
there is something that conflicts with a variable used by the m4
footprints or perhaps there is a name that just isn't compatible.

If you want, you can post that list.

Your other option, if you're already building geda/gaf from cvs is to
build a brand new gsch2pcb and gnetlist.  I added an option last night
to gsch2pcb to totally disable using m4 for footprints.  Actually, m4 is
disabled by default and you'd have to use --use-m4 or put use-m4 in your
project file.  So my guess is that just updating gnetlist and gsch2pcb
will make your problem go away.

-Dan




_______________________________________________
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user