[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

gEDA-user: New Footprints

I added the following footprints to my website ---

* Trimpots POT__Bourns_3006P-Series and POT__Bourns_3299W-Series

* Molex USB MINI-B connector CON_USB_MINI_B__Molex_67503-1020
  N.B. The drawing, SD-67503-010, has two pads with no clearance to
  the PCB edge. I reduced the length of each of these pads by 25mils
  and shifted the pad centers to provide 25mils of clearance.  The
  symbol should be placed so that the mark is on the edge of the PCB.
  The hashed rectangle defines the pattern restricted area.

(* jcl *)

-- 
http://www.luciani.org


_______________________________________________
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user