[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

gEDA-user: Hi.... first post

Can any of you please help me with this question? Why didn't
the .cmd file work?

Tarun


---------- Forwarded message ----------
From: C P Tarun <tcpip@dhandanought.org>
Date: Mar 14, 2007 9:33 PM
Subject: Re: gEDA-user: Hi.... first post
To: gEDA user mailing list <geda-user@moria.seul.org>


Guys,

Can you please help me with one part of my original question?

> 1.  When I load the netlist into the PCB program, it gives errors
>     saying that it couldn't find pins with the names given in the
>     footprints, or some such thing. Just try loading my .pcb file
>     first, then try loading the netlist, and you will see what I mean.
>
>     This problem does not go away even after you
>     :ExecuteFile(test-schem.cmd)
>

I believe we have all agreed that the pin numbers in the symbol and
the footprint don't match, causing problems with the netlist. However,
I did run the test-schem.cmd file after loading the layout into PCB.
Shouldn't that have fixed these naming problems?

For the set of my files, check
http://www.dhandanought.org/tcpip/audio/EXP/geda-probs/

thanks,
Tarun


_______________________________________________
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user