Re: gEDA-user: Hi.... first post

[Stuart Brorson <sdb-atMUNGEDcloud9_dot_net>]

Umm, Dan and DJ are the right ones to answer this question.  It's
possible the renaming functionality hasn't been completely built into
PCB yet, but they are the experts -- not me.

Meanwhile, just make the symbol pinnumber match the footprint
pinnumber and forget about the .cmd file.

Stuart


On Thu, 15 Mar 2007, C P Tarun wrote:

> Can any of you please help me with this question? Why didn't
> the .cmd file work?
>
> Tarun
>
>
> ---------- Forwarded message ----------
> From: C P Tarun <tcpip@dhandanought.org>
> Date: Mar 14, 2007 9:33 PM
> Subject: Re: gEDA-user: Hi.... first post
> To: gEDA user mailing list <geda-user@moria.seul.org>
>
>
> Guys,
>
> Can you please help me with one part of my original question?
>
>> 1.  When I load the netlist into the PCB program, it gives errors
>>     saying that it couldn't find pins with the names given in the
>>     footprints, or some such thing. Just try loading my .pcb file
>>     first, then try loading the netlist, and you will see what I mean.
>>
>>     This problem does not go away even after you
>>     :ExecuteFile(test-schem.cmd)
>> 
>
> I believe we have all agreed that the pin numbers in the symbol and
> the footprint don't match, causing problems with the netlist. However,
> I did run the test-schem.cmd file after loading the layout into PCB.
> Shouldn't that have fixed these naming problems?
>
> For the set of my files, check
> http://www.dhandanought.org/tcpip/audio/EXP/geda-probs/
>
> thanks,
> Tarun
>
>
> _______________________________________________
> geda-user mailing list
> geda-user@moria.seul.org
> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
>


_______________________________________________
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user