[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: gEDA-user: TwoStageAmp example
> What is the plan for supporting circuit simulation within the gEDA
^^^^
"plan?!?!?" .... *chuckle*
> suite going forward? I started off thinking that I would have to
> generate a spice netlist (because I read somewhere that the spice-sdb
> backend was for use with both ngspice and gnucap). Then I started
> wondering if perhaps a new netlist backend would be required for use
> with gnucap. Now I'm not sure what to think, so I think I'll ask.
Ummm, from my perspective, the "plan" is to retain the two circuit
simulators as part of the suite. Both have their places. Al will
continue to improve Gnucap, and ngspice will also (more) slowly
evolve. Folks can use either one, depending upon what works best for
them.
As for the new netlist backends for Verilog-AMS or VHDL-AMS to feed
Gnucap: They will appear as soon as somebody steps up to the plate
and creates them!
> At the moment, I am compiling gnucap-2007-03-29, and I think (but I'm
> not sure) that I will need to follow that by compiling the ngspice17
> models. Then I'm hoping I can load the spice netlist produced by
> gnetlist. Am I heading down the right track?
I suggest you play around with both Gnucap and ngspice, and see which
one suits your purposes. I believe Gnucap still accepts SPICE syntax
netlists, so you can netlist using spice-sdb and then use either
Gnucap or ngspice for simulation.
Stuart
_______________________________________________
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user