[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: gEDA-user: TwoStageAmp example

> I suggest you play around with both Gnucap and ngspice, and see which
> one suits your purposes.  I believe Gnucap still accepts SPICE syntax
> netlists, so you can netlist using spice-sdb and then use either
> Gnucap or ngspice for simulation.
>
So far, I think that the yum installed FC6 gnucap doesn't like the
spice netlist produced by gnetlist.  I say that because, when I
execute

$ gnucap try1.cir

I get messages that look like:

V1 in 0 PULSE(0 1 10ms 0 0 1s 2s)
   ^ ? need 2 more nodes
V1 in 0 PULSE(0 1 10ms 0 0 1s 2s)
        ^ ? what's this?
...

So I thought I would try compiling the latest development snapshot and
see if that imported my spice netlist better.

> As for the new netlist backends for Verilog-AMS or VHDL-AMS to feed
> Gnucap:  They will appear as soon as somebody steps up to the plate
> and creates them!
So, does that imply that the long term plan is that somebody would
write the appropriate backend for Gnucap?

--wpd


_______________________________________________
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user