Re: gEDA-user: Fw: pcb 1.99n automake version DJ Barrow and EgilKvaleberg m4 added to library

[Mark Cianfaglione <mark_dot_cianfaglione-at-NOSPAMsympatico_dot_ca>]

The autorouter function works but the tracks it generates don't appear 
to be the same as the tracks that are manually laid. You can notice 
this when you autoroute the board after putting down a copper plane or 
when a copper plane is laid down after autorouting on the same level.

As well... Is it possible to get mitred corners? If this autorouter 
code is from the MUCS code then there was a patch for it.

Mark



Terry Porter wrote:
> On Sun, 9 Feb 2003 23:15:59 +0100
> Leva <leva@interware.hu> wrote:
> 
> 
>>Hi all,
>>
>>
>>I've got a message from John Grissen with a brand new version of PCB. He asked
>>me to put it to my hompage. You can get it from the following link.
>>
>>
>>http://web.interware.hu/leva/cuccok/pcb/pcb-1.99n.tar.gz
>>
>>
>>I have not tested it yet.
> 
> 
> Further testing has found that the above dies when the log window is selected with
> the error:-
> X Error of failed request:  BadWindow (invalid Window parameter)
>   Major opcode of failed request:  12 (X_ConfigureWindow)
>   Resource id in failed request:  0x0
>   Serial number of failed request:  2614
>   Current serial number in output stream:  2616
> 
> This seems to be the only problem so far.
>